Cricket Bats Just another WordPress weblog

6Feb/1025

How a cricket bat is made

How a Gray-Nicholls cricket bat is made. Presented by Stuart Kransbueler, Head bat maker of Gray - Nicholls Australia.

Tagged as: , 25 Comments
6Feb/100

Things to Know About Cricket Game

Cricket is a bat and ball game played between two rival teams each having eleven players. The game is played on an oval shaped field and there will be two umpires to oversee the game and ensure the rules are followed. Although the size of the field may vary from one ground to another, the standard field is expected to be of 200 meters diameter.

A cricket bat is oblong shaped with a narrow handle. A full-sized bat is around 90 centimeters in length. A cricket ball is basically made of cork and is then stitched with leather cover. A cricket ball is 22.4 to 22.9cm in diameter and should weigh around 10 ounces.

In the middle of the field is an 18 meters long dry flat strip called as a pitch. When the game is played, two batsmen will be at the pitch and at different ends. One batsman will face the delivery of the ball from the bowler. The bowler runs up the bowling line and bowls the ball at the batsman.

The stumps are three sticks of equal size measuring around 90 centimeters tall and planted with 5 centimeters separating them. Bails which are small pieces of wood are placed on top of the stumps.

Other ways runs can be scored when the ball if hit crosses the boundary lines of the field.  The batsman is deemed to have hit for four runs when he hits the ball and the ball hits the ground before crossing the boundary lines. Again the batsman is deemed to have scored six runs when the ball that is hit goes over the boundary line without touching the ground.

The batting team also gets runs through no balls. When the bowler oversteps the crease or bowls over the head of the batsman, it is considered a no ball and each such no ball is worth one run. A ball bowled is considered wide when the ball goes outside the line of the pitch before coming in line with the batsman. This is also worth one run. A leg bye is scored when the ball hits the batsman but does not contact his bat and then the batsman proceeds to run. A bye is scored when the batsman runs without the ball coming into contact with the batsman or his bat. 

The fielding team can get a batsman out in multiple ways:

•    Directly catching the ball after it is hit. This is done when the batsman hits the ball with his bat and a fielder catches the ball before the ball hits the ground.
•    Clean bowling the batsman out. This happens when the bowler bowls the ball and the ball strikes the batsman’s stumps or bails.
•    Leg before wicket (LBW): This happens when the bowler bowls and the batsman’s legs come in the way of the stumps being hit. 
•    Stumped, when the batsman comes forward to hit the ball but steps out of the crease, misses the ball and the fielder behind the stumps collects the ball hits the stumps before the batsman could get back to the crease.
•    Run out, when the batsman attempts to score a run but has his stumps hit by the ball before he reaches the other crease.
•    Hit wicket is when the batsman hits his own stumps while trying to hit the ball.
•    Retired, when the batsman voluntarily decides to finish his innings mostly due to injuries
•    Timed out, when the next batsman fails to appear on the pitch within two minutes of the last batsman getting out.

Sharon Samraj is an expert author, who is presently working on the site Cricket,Sports equipment. He has written many articles in various topics like Buy cricket bats, cricket helmetFor more information contact cricket bats online.

6Feb/1025

The Top Ten Weird Dismissals Of Cricket!!

In this video I countdown and show you the Top Ten Weirdest Dismissals In International Cricket. SONGS: 1. Ready, Steady, Go - Paul Oakenfeld 2. I'm On My My - The Proclaimers 3. We Will Rock You - Queen NOTICE: This video was made before Kevin Pietersen's 'helmet' dismissal. Therefore, it couldn't have been put into the top 10..

5Feb/100

Lords Cricket Balls

Lords Cricket Balls

5Feb/100

Funny Cricket

Some funny cricket moments

Tagged as: , No Comments
5Feb/100

Mongoose cricket bat set to take Twenty20 by storm

The New Revolutionary Mongoose Cricket Bat launched 22nd May 2009. Mongoose players include Stuart Law, Devon Malcolm, Ebony-Jewel Rainford-Brent and Laura Marsh. The bat is the brainchild of Marcus Codrington Fernandez. There are currently two bats in the range, the MMI as shown in the video and the more traditional looking Cor3. www.mongoosecricket.com

4Feb/100

How to Prepare Your Cricket Bat

A common reason why cricket bats start to crack and deteriorate in its playability is that it hasn’t been prepared correctly. The Cricket bats are made from soft English Willow. When a thunderbolt of a delivery hits the cricket bat, the ball is sure to damage the bat. That is the last thing you want from your new cricket bat, especially if you’ve paid $400+. So therefore it is important that your brand new cricket bat is prepared correctly and carefully. Knocking in the bat also makes it harder, improving the ‘ping’ or rebound qualities making the bat perform to its optimum. There are 3 major areas for bat care. These are ‘oiling’, ‘knocking in’ and ‘protective facing’. Preparing your cricket bat takes a little bit of time so it is important not too get too anxious. You will be thankful that you spend the time preparing your bat after many years of successful innings with your new cricket bat.

Step #1 - Oiling:

Oiling the cricket bat is important so when the knocking in process occurs, the bat doesn’t crack. The oil makes the bat more supple, decreasing tension so that the bat doesn’t crack. Raw Linseed Oil should be used to oil your cricket bat.  Using only a teaspoon of Raw Linseed Oil, rub the oil all over the cricket bat (except over the splice of the bat). When the first light coat of oil is applied, the bat should be left horizontally overnight. Another light coat of oil should be applied to the bat. Leave the bat in the same position overnight. It is important not to over oil the bat.

Step #2 – Protective Facing:

This is optional to you but it is highly recommended. A protective adhesive sheet should be applied to the bat. Most bats actually come with this sheet so at first, the whole oiling step applies once the sheet is removed. The protective sheet just protects the bat from the huge impact of the cricket ball. This protective sheet is optional but it is advised that it is used for the first year of use. Then it should be taken off and oil applied to the bat.

Step #3 – Knocking In:

This most important process in preparing your cricket bat and it is also the lengthiest process. Using a wooden mallet (available at cricket shops and most sport stores), light taps of the cricket bat should be made. Starting in the middle of the bat, lightly tap the bat and then work towards the edges. After a while, the tapping of the bat should gradually become a little bit harder. This process takes a while. 4-6 hours is generally how long it takes but it can take longer. It is important to keep checking the bat to see whether any dints are occurring. If they do, reduce the power of your knocks.

Once this is done, it’s time to take the cricket bat down to the nets. It is important to start out with soft shots and then gradually getting into harder, more powerful shots after a few net sessions. Throw-downs with an old cricket ball is recommended so that no dents and seam marks occur. After a couple or few net sessions of throw-downs, you can move onto facing some bowling with an old ball. It is important to keep checking the bat to make sure it isn’t being damaged. After a session or two, some harder balls can be faced so it is able to face the hard cricket ball in a game. After a few sessions, the bat is ready to be used in a game.

Step #4 – General:

If a protective adhesive facing was applied, it can be taken off after a year or so. When the protective facing is taken off, it is important to give the bat another light oil once or twice, leaving it overnight each time. Then using the mallet, give the bat another mini knock in for an hour or two. This process can be repeated each year or so onwards till you stop using it.

Summary:

·         Great care should be taken to your cricket bat

·         Don’t be too anxious to start using your new bat in a game straight up, you’ll be thankful for taking time to prepare your bat.

·         Oil lightly twice, leaving overnight both times to dry, using Raw Linseed Oil. This makes the wood supple and reduce it from cracking

·         Protective Adhesive Facing can be applied to provide protection of the bat

·         Using wooden mallet, lightly knock in your bat, gradually increasing strength. Work from the centre towards the edges.

·         Use old cricket ball in nets, gradually using harder balls. Start with throw-downs and then into full pitch bowling.

·         Repeat oiling and a quick knock in every season or so.

·         Make sure to always look after the bat, make sure it doesn’t receive any moisture or exposed to intense heat for long hours.

·         Enjoy scoring plenty of runs.

Mitchell Eastman
www.TestCricket.com.au - Cricket articles, videos, directory and forum.

4Feb/100

The History of Cricket

Cricket enjoyed a completely new profile following England’s famous Ashes victory in 2005. With supporters locked out of grounds and cricket betting enjoying a boom, the sport was the centre of attention. With new supporters being introduced to the game and the world of cricket spread betting, the roots of the game are a far cry from the fast pace razzmatazz that attracts so many to cricket spread betting.

The origins of cricket are a bit of a mystery. Both written and pictorial evidence, of what appears to be cricket, date back to the Plantagenet period. In these paintings, it is somewhat difficult to determine whether the game being played is indeed cricket or a version of ‘rounders’. The first most likely depiction of the game comes from an illustration of a man demonstrating a stroke to a boy holding a straight club in a Decretal of Pope Gregory IX.  A review of the accounts of the Royal Household in the year 1300 reveals the sums of 100 shillings and 6 pounds were spent on ‘creag’ and other sports of Prince Edward.  The reference mentions Edward I, then aged 15, playing a game called ‘creag’ in Newenden, Kent. There is no definitive evidence that this game was indeed cricket, but it does seem likely.

In Tudor times there were definite references to boys playing ‘creckett’ and during the seventeenth century there were also references made that Oliver Cromwell played cricket in his youth. The first definite mention of the game came in a court case in 1597 over a dispute between the ownership of a plot of land involving the Royal Grammar School in Guilford. A coroner by the name of John Derrick testified that he and his friend had played ‘Kreckett’ on the land some fifty years earlier. By the end of the seventeenth century there were mentions of cricket games in local newspapers, but the first real reference in literature appeared in a poem about a rural cricket match in March 1706 by William Goldwin. It was translated into English verse in the twentieth century by Harold Penny:

“In early spring a chosen cohort of youths, armed with curved bats ...descends rejoicing to the field. Each team tries to impose its own laws, until a grey-haired Nestor composes the squabble. They mark the pitch and on the stumps place the bail which cries out for good defence against the leathern sphere.” Two umpires stand leaning on their bats while the scorers sit on a hummock ready to cut the mounting score on sticks with their little knives. The game begins and a batsman propels the strident ball afar ...but a clear-sighted scout (fieldsman) prepares his ambush in the deep and with outstretched palms joyfully accepts it as it falls ...and grief overwhelms those who silently mourn their friend's disaster. The tale of misfortune continues, and one batsman in going for a second run falls headlong at the very foot of the wicket. The shaken earth groans beneath his great weight and the rustic throng exult in laughter. The other side fares better and Victory, long striven for, noisily flaps its wing and fills the sky with the shouts and roars of success".

It is generally accepted that cricket began as a children’s game around 1550 somewhere in the counties of Sussex, Surrey and Kent in an area known as the Weald. These areas were perfect for the game as there were clearings in the forest where the sheep had grazed and therefore provided the short grass needed for the playing field.  The game was then played by working men in the early 1600s and soon interest grew from the gentry as it gave them a gambling opportunity. There is also another possibility that cricket was derived from ancient bat-and-ball games played in the Indian subcontinent. It was then transported to Europe via Persia and the near east by merchants and from here developed into the cricket we know here in England and which is played professionally in most of the Commonwealth of Nations.

There is also some contention as to how the game received its name. There are many theories on how ‘creag’ evolved into ‘creag-a-wicket’ and then into ‘cricket-a-wicket’ before just ‘cricket’ but this is all speculation. It seems more likely that the name was derived from an old French word ‘criquet’ which meant ‘club’. This French word is thought to have come from the Flemish word ‘krickstoel’, which is a long low stool which one knealt on in church. This was similar to the wicket used in early cricket, or the early stool in ‘stoolball’. Stoolball is a similar sport to cricket, still played today in the South of England’ which is considered to be a precursor to cricket.

By the end of the 17th Century, cricket had risen in popularity and the big games were reported on. The first of these matches documentated was a Sussex match in 1697. It is generally believed that ‘village cricket’ had developed by the middle of the 17th century but it ws not until the following century that ‘county cricket’ really developed. After the Puritan era, cricket thrived and so did the enormous rise in gambling on games. In 1664 a Gambling Act was passed to limit an individual stake to £100, a small fortune in those days and a world away from the current cricket betting culture.

As cricket moved into the eighteenth century, the enormous gambling led to the first patrons of teams being formed which is the likely origin of the county game today. Cricket then started to move around the world. In the eighteenth century cricket travelled around the colonies to places such as West Indies, India and New Zealand. It arrived in South Africa and New Zealand the following century. The Laws of Cricket were codified for the first time in 1744 by the so-called ‘Star and Garter Club’ who ultimately founded the MCC at Lord’s in 1787.

Cricket faced a real crisis at the start of the nineteenth century as virtually all matches ceased during the periods of war. It was after this time that the campaign to allow overarm bowling started to gain support. The game saw fundamental changes as all the modern day county clubs were established. The first ever International match took place between Canada and USA in 1844 and it was not for another 15 years that England would embark on their first tour. 1864 was a massive year for cricket as it was not only the year that legalised the use of overarm bowling, but it was the year that the fatherstone of English cricket, WG Grace, made his debut.

As cricket moved into the twentieth century, the game started to change. First, in 1889, the normal four ball over was replaced with first five balls and then to the current six ball over in 1900. The Australians actually tried an eight ball over at this time and it was adopted experimentally in England for the 1939 season but never succeeded. In the 1960s, England county teams started playing limited overs cricket for the first time which resulted in the shortened version of the game having great support.

Since then cricket has become an even bigger attraction and is currently one of the most popular sports of all time. The introduction of shorter brands of cricket, including the hugely popular Twenty20 concept, have proved a major success in drawing an audience that would otherwise not enjoy the game of cricket and the added excitement brought from <a rel="nofollow" onclick="javascript:pageTracker._trackPageview('/outgoing/article_exit_link');" href="http://www.sportingindex.com/sportingindexweb/spread-betting/cricket-tv/">cricket betting</a>.

Chris Williams is sports activist and loves writing about sports and sports related updates like Online Sports Spread Betting

4Feb/100

Tips for Buying Cricket Equipments

If you want to play cricket match, then you will need cricket equipments comprising of a bat to hit the ball, batting pads, batting gloves, helmet, wicket keeping gloves, cricket shoes etc.

You must check a few things when buying cricket bats. Heavier bats will deliver more power, even if you do not hit the ball in the middle of the bat. However, lighter cricket bats will enable you to swing faster. This will increase your chances of striking the ball with the middle of the bat.

You should then check the type of handle the bat has. You will have to opt for either oval or round handle. Handles that have an oval shape are typically stronger. They will also help absorb the shock created when you hit the ball. However, it will be harder for you to grip cricket bats with an oval handle - particularly with your bottom hand. If you like holding your bat with your bottom hand, then you should look for round handles. This will allow you to put more lift when striking the ball.

You will have to think about the location of the sweet spot when buying cricket bats. The rounded tip of the blade is called the toe. An average cricket bat will have a sweet spot that is four to 12 inches from the toe. This commonly found location is suitable for hitting a wide variety of shots.

High sweet spots are typically located five to 13 inches from the toe. These bats have their weight distributed further up the blade, so you will be able to swing faster. Low sweet spots are located three to 11 inches from the toe. These bats are suitable for aggressive hitters as they will be able to drive the ball more forcefully.

Yet another important thing you need to consider when buying cricket bats is their size. You will need to choose a size that will be comfortable to the size of your body. You can determine the appropriate size of the bat by getting into your stance and leaning the bat against your front leg. Make sure the top part of the bat does not overshoot your groin.

The purpose of batting gloves is to protect your fingers from injury. When selecting the best batting gloves, look at the fingers of the gloves to check that each finger of both batting gloves carries flexible padded areas. Also check that the thumb of the bottom hand (right hand for a right handed batsman and vice versa) has extra protection. You should note that from the beginning of the wrist to your longest finger’s tip, in a straight line. This is critically important.

Cricket batting pads are one of the most important accessories that you require when you start playing the game. Ensure that you get a pair, which fits your legs properly and there is no discomfort while wearing them. If you wear a good pair of pads, which suits your style and stance, you will feel much more comfortable while batting.

Batsmen are often required to wear a sturdy helmet for protecting themselves from any serious injury by the hard cricket ball, particularly when facing fast bowlers.  A helmet should fit well with the peak usually protruding horizontally from the line of a batsman’s eyebrows. Apart from being steady and solid, a helmet needs to be light in weight. It should allow airflow with a comforting sweat absorption material.

In a game of cricket it is not easy to find a substitute wicketkeeper from the playing eleven, which is exactly why it is critical to buy wicket keeping gloves of the highest standard. Broken fingers are one of the most serious risks on the cricket field as far as a wicketkeeper is concerned. But for a glove, it can get very painful when the ball thuds a wicketkeeper’s fingers! Look at the fingers of the gloves to check that each finger of both batting gloves carries flexible padded areas.

A wicketkeeper is arguably the most active individual on the field. He needs to watch each and every ball, take crucial catches, stop byes, effect stump-outs and encourage his team members. There has to be some tips for getting the best wicket keeping pads

From point of view of smooth and precise feet movement either for a batsman or bowler as well as fielders, getting the right cricket shoes is critical. The most important things to consider while buying cricket shoes are their comfort and grip. Batsmen generally prefer shoes with sturdy spikes at the front for proper grip combined with rubber-treaded heels. Fast bowlers usually prefer shoes that have spikes at the front and back along with good support around the ankle area.

Sharon Samraj is an expert author, who is presently working on the site Cricket bats, Cricket gear. He has written many articles in various topics like Cricket store, Cricket shop. For more information contact Cricket equipments.

3Feb/100

Rugby League Merchandise – rugby training equipment, cricket equipment, cricket balls

Many people have never seen a cricket ball, so it is not surprising that most haven’t the slightest idea what they look like, how they’re made, things like that. This article will help fill in some of the blanks about this particular piece of cricket equipment, by answering the simplest of questions people might consider most interesting.

What are cricket balls made of?At its core, they’re made from cork, which of course comes from a specific type of Oak tree. Much like an American baseball, balls are wound tightly around their circumference with string to a certain diameter, which in the men’s sporting events is between 224 and 229 millimeters. The balls must also weigh between 155.9 and 163.0 grams. These wound cores are then covered with four crescent-shapes strips of tanned leather which are sewn together at a seam along the ball’s middle. The balls are traditionally dyed red, except for one-day matches where night play makes a white ball more visible under the lights. Cricket balls are designed to last for at least 80 over, the equivalent of over 5 hours of play. Balls are only replaced during play under specific conditions according to league rules. These balls can be machine or hand-made, in either two or four pieces, though much of the wool yarn and cork comes from central locations like Portugal and Australia. Kookaburra, Slazenger, and Gray-Nicolls are major distributors of tournament-quality balls.

What is the “swing” of a ball referring to?The unique construction and density of a cricket ball, in combination with a bowler’s variety of delivery, the speed at which they throw, and the age of the ball in play determine a ball’s “swing,” i.e. its horizontal deviation from side to side after it leaves a bowler’s hand. All these variables contribute something similar to, but yet different from, the curve of a baseball when released by a pitcher.

For a better understanding of the difference between the two, you can consult a scientific discussion of the Magnus Effect online. Bowlers use the seams on a cricket ball to create “spin” on deliveries. Is there a difference between hand-made and machine-made balls?At least one study completed in November 2008 suggests that all balls are not made alike, a factor that contributes to inconsistency in play. Softer balls that are more forgiving can be placed more easily by batters. More runs are possible as these balls break down over a few hours, enough time for a significant amount of runs to be scored by less skilled players. The use of different core materials (rubber and cork, or a mixture of the two, for example) and different specifications for the surface finishes and yarn highlights the need for better standards. The official committees of ICC tournament play will need a closer look, as tampering and inferior quality are still issues that occasionally become a focal point for cricket balls.

For More Free Information visit Rugby League Merchandise

Tom Miller
Lifestyle and Internet Marketing Conslutant
Tom Miller

Internet B2B Marketing

http://personaldevelopmentplanning.com

Powered by Yahoo! Answers